OPPO 1036 HINGED Knee Stabiliser

(No reviews yet) Write a Review
380.00 Grams
Gift wrapping:
Options available
Calculated at Checkout
  • OPPO 1036 HINGED Knee Stabiliser


OPPO 1036 HINGED Knee Ligament Support Brace





  • Functional 3/16" breathable neoprene knee brace.
  • Polycentric hinge with flexion and extension pin-stops for controlled range of motion.
  • Lightweight, open patella design.
  • Increases stability and provides support and protection.

  • Please follow the doctor's instruction. The following is the step of setting the angle. Open cap cover. Release pins, select correct settings and reinsert pins. To lock uprights in fixed 0° angle, set four pins setting at 0°. To lock in 10°, 30°, 50°, 70°, 90°, and 110° of extension or flexion, set the two extension-pins on each hinge at desired setting in the location marked “lock” and the two flexion-pins in corresponding (same number) setting in the open opposing position. Repeat the procedure on the opposite side of knee support to match the new settings.
  • Insert foot into knee stabilizer and pull up to the knee.
  • Be sure the opening is on kneecap and hinge axis align with the knee joint.
  • Secure the upper two small hook and loop straps.
  • Thread through buckles and secure the upper and lower hook and loop straps to desired compression.

  • Post surgical use
  • Patellar subluxation/tilting
  • Collateral ligament injury
  • Cruciate ligament sprain
  • Moderate sprain/ strain



Measure around the mid-section of the knee, while in a standing position.


33.3-37.5cm (13 1/8-14 3/4")
37.5-40.6cm (14 3/4-16")
40.6-45.1cm (16-17 3/4")
45.1-50.2cm (17 3/4-19 3/4")
50.2-54.6cm (19 3/4-21 1/2")
FIBER CONTENTS 70% Neoprene, 15% Nylon, 15% Cotton














View AllClose